日本日智电动葫芦|单链日智电动葫芦|质量可靠
日本日智电动葫芦进行设置后需要如何检查
日本日智电动葫芦作为进口起重机械，进行设置后一定要用心检查，否则就是对生命的不负责任，那么设置后如何检查呢？
1、检查换脸日本日智电动葫芦的运螺栓、螺母与启齿销等组件有无脱落的情况，并检查紧固件的紧固组装程度是否充分；
2、检车按键开关保护绳是否确实安装，拉扯按键的开关保护绳是否受力；
3、日本日智电动葫芦电源与电缆是否固定在电缆支撑上；
4、日本日智电动葫芦电源电压是不是正常，接地线是否正常连接。
上海祝融起重机械有限公司
联系人：余小燕 18016070061/15216878467
电话：021-67866730
传真：021-67715051
邮箱：15216878467@139.com
公司邮箱：zhurong@gks-cn.com
地址：上海市松江区九亭镇盛龙路751号5栋4层402室
邮编：201615
After the Japanese intelligence electric hoist set need how to check
The Japanese intelligence electric hoist as hoisting machinery imports, after setting must be carefully check, otherwise, it is a kind of irresponsible to life, so after setting how to check?
1, check in face of the Japanese intelligence electric hoist of bolt, nut and announces the pin components such as presence of fall off, and check whether the degree of fastening assembly fasteners fully;
2, check whether the key switch protection rope actually installed, whether pull key switch protection rope force;
3, the Japanese intelligence electric hoist power supply and cable is fixed on the cable support;
4, the Japanese intelligence electric hoist power supply voltage is normal, ground wire is normal connection.
Shanghai YuYing lifting Machinery Co., Ltd.
Atten: Susan 18016070061/15216878467
Tel: 021-67866730
Fax: 021-67715051
E-mail: yyjixie@126.com
E-mail2: zhurong@gks-cn.com
Add: Shanghai city Songjiang District town Jiuting Shenglong Road No. 751 5#402
P.C: 201615
Web：www.yuying-lifting.com
www.cnzhurong.com